Ir Sensor

Product Details:

The TSOP1738 is a infrared receiver tuned to receive IR of frequency 38 kHz on;y. It is perfect for making obstacle sensors and to read signals from most IR remotes(TV, AC, Home Theatre Remotes, etc). When used as a receiver in distance sensors, it provides better performance as it allows better reception and protection from ambient light compared to other IR receivers. It can be used to read signals of most IR Remotes. Libraries are available for all popular microncontrollers, Arduino and Raspberry Pi to read the button pressed on the remote. Great receiver for making wireless projects, robots, home automation systems, etc

Additional Information:

• Delivery Time: 3

Product Details:

TSOP1838 IR Receiver is a miniaturized receiver for infrared remote control systems. TSOP1838 IR Receiver can detect any signal of 38 kHz (all remotes in India works on 38 kHz) and give output at pin 3 after processing it.

TSOP1838 sensor has 3 pins GND, Vcc and Signal. GND is connected to the ground and Vcc is connected to the positive terminal of the power supply. A 5V DC power supply is used to power up this sensor and it consumes 5mA while operating. Signal pin is an output and sequence generated according to the detected IR signal can be yielded from this pin. This sequence is served to the microcontroller for analysis and its recreation.

This sensor also includes a photodetector and preamplifier in one package and an internal filter for PCM frequency. Power consumption is very low. TSOP1838 IR Receiver provides improved immunity against ambient light.

TSOP1838 IR Receiver is a miniaturized receiver for infrared remote control systems. TSOP1838 IR Receiver can detect any signal of 38 kHz (all remotes in India works on 38 kHz) and give output at pin 3 after processing it.

TSOP1838 sensor has 3 pins GND, Vcc and Signal. GND is connected to the ground and Vcc is connected to the positive terminal of the power supply. A 5V DC power supply is used to power up this sensor and it consumes 5mA while operating. Signal pin is an output and sequence generated according to the detected IR signal can be yielded from this pin. This sequence is served to the microcontroller for analysis and its recreation.

This sensor also includes a photodetector and preamplifier in one package and an internal filter for PCM frequency. Power consumption is very low. TSOP1838 IR Receiver provides improved immunity against ambient light.

Additional Information:

• Production Capacity: 8287367
• Delivery Time: 2
• Packaging Details: BUBBLE CONTAINER

Product Details:

IR Infrared Obstacle Avoidance Sensor Module has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube. The onboard comparator circuitry does the processing and the green indicator LED comes to life.

We are the leading IR Infrared Obstacle Avoidance Sensor Module,
Get best price for IR Infrared Obstacle Avoidance Sensor Module.

Product Details:

Working voltage: DC 3. 3v-5v working current: Try to choose more than 1a power supply working temperature: - 10oc - +50ocmounting aperture: M3 screws detection range: 1mm to 60 cm adjustable, the closer the performance more stable, white reflects the farthest distance. Size: In the control panel of 42mm * 38mm * 12mm (length * width * height) small forward 25mm * 12mm * 12mm (length * width * height)output interface: 6 wire interface (1234 to 4 signal output ends, + positive power, - for the negative power is ground) the output signal: TTL level (can be directly connected to i/0 microcontroller, infrared light reflected back to the sensor induction, the red indicator light, output low level.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 1
• Packaging Details: bubble