Motor Driver

Product Details:

This L293D Motor Driver Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.

This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.

L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. a motor.

The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to PWM outputs of the Arduino.

Product Details:

The TB6600 Stepper Motor Driver is a user-friendly professional stepper motor driver that can control a two-phase stepping motor. It works with any microcontroller that can generate a 5V digital pulse signal. 

TB6600  stepper motor driver has a wide range of power input, 9~42VDC power supply. And it can output a 4A peak current, which is enough for most stepper motors. The stepper driver supports speed and direction control.

The ability to control the speed and position of the stepper motor is one of the benefits of using the TB6600 Stepper Motor Driver. These drivers are suitable for a limited number of stepper motors. Using these types of drivers, one can reduce the amount of code and connections.

TB6600  Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis Upgraded Version of the 42/57/86 Stepper Motor segment increased to 32 segments, suitable for high subdivision applications.

The TB6600 Stepper Motor Driver is a user-friendly professional stepper motor driver that can control a two-phase stepping motor. It works with any microcontroller that can generate a 5V digital pulse signal. 

TB6600  stepper motor driver has a wide range of power input, 9~42VDC power supply. And it can output a 4A peak current, which is enough for most stepper motors. The stepper driver supports speed and direction control.

The ability to control the speed and position of the stepper motor is one of the benefits of using the TB6600 Stepper Motor Driver. These drivers are suitable for a limited number of stepper motors. Using these types of drivers, one can reduce the amount of code and connections.

TB6600  Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis Upgraded Version of the 42/57/86 Stepper Motor segment increased to 32 segments, suitable for high subdivision applications.

SHIPPING

Additional Information:

• Item Code: 2
• Delivery Time: BUBBLE CONTAINER