Product Details:
No Of Phase | 2 |
Step Angle | 1.8 Degree |
Voltage | 3 volt to.12 volt dc |
Torque | 4.2kg-cm |
Model/Type | Nema 17 |
Voltage Rating | 2.8 V |
Resistance | 1.65 Ohm2 |
Inductance per Phase | 3.2 mH |
We are specialized in offering Nema17 Stepper Motor to our customers. Our presented product is extremely used in the market owing to their top features.
Additional Information:
Product Details:
Minimum Order Quantity | 100 Piece |
No Of Phase | 2 |
Step Angle | 1.8 Degree |
Voltage | 3.6 |
Torque | 4kg-cm |
The motor wire is made of pure copper enameled wire wound through wire technology.The copper wire is evenly arranged,the temperature rise of the motor is lower,and the deformation and noise will not occur during long-term transportation.silicon steel rotor the bearing is made of international silicon steel material and imported German technology the surface is coated with imported rotor glue to prevent oxidation of silicon steel and reduce the surface burr after grinding.compared with the motor in the same line,the output is more stable the noise is lower and the service life is longer.Package Include 1 x Nema 17 Stepper Motor. Voltage: 3-6 V Torque: 4 Kg-cm Step Angle: 1. 8 deg/step Shaft Diameter: 5mm; Shaft Length: 10mm
Additional Information:
The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The NEMA17 4.2 kg-cm Stepper Motor can provide 4.2 kg-cm of torque at 1.2A current per phase.
The motor’s position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The NEMA17 4.2 kg-cm Stepper Motor provides excellent response to starting, stopping, and reversing pulses from the stepper motor driver.
They are very useful in various applications, especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc.
It is a brushless DC motor, so the life of this motor is dependent upon the life of the bearings. The position control is achieved by a simple Open Loop control mechanism so doesn’t require complex electronic control circuitry.
It comes with a detachable 70 cm cable which makes wiring and rewiring very fast and easy work. The design of this cable is such that it can directly be mounted on a stepper motor controller. So, playing with the connection is done with just snap of fingers.
The motor’s shaft has been machined for good grip with a pulley, drive gear etc., and especially avoiding stall or slip
Additional Information:
Product Details:
Minimum Order Quantity | 16 Piece |
Torque | 2 Nm |
No Of Phase | 2 |
Step Angle | 1.8 Degree |
Voltage | 24 V |
Brand | ABB |
Motor Type | Bipolor |
Current | 401-800 mA |
No Of Poles | 4 |
Insulation Type | Class A |
Model 60HS65-2804AF Type Bipolar Rated Voltage 3.36V Step Angle 1.8° Rated Current per Phase 2.8A Resistance per Phase 1.2 Ω ±10% Inductance per Phase 4.2 mH ±20% Holding Torque 2.1Nm Rotor Inertia 570gcm² Weight 1.030kg No. of Lead 4 Operating Voltage 24-42V DC Length 65mm Step Angle Accuracy ±3 Arc Minute Protection Class DIN 40050 - IP65
Additional Information:
Product Details:
Minimum Order Quantity | 8 Piece |
No Of Phase | 2 |
Step Angle | 1.8 Degree |
Application | Regular |
Phase | Single Phase |
Speed | 6001-10000 RPM |
Brand | unique india sales |
Voltage | 24-48V DC |
Motor Type | Bipolor |
Current | 2.8 Amp |
No Of Poles | 4 |
Insulation Type | Class A |
Stepper motors are used in motion systems high precision positioning is required. Stepper motors can deliver direct and precise motions in a small volume due to their high power even at low speeds, stall torque, and ability to divide steps into micro-steps.
Permanent magnet and hybrid technologies are used to provide a full range of solutions.
The absence of mechanical commutation gives these motors a longer life which is usually given by the sleeves according to the load applied on the shaft.
Model | 60HS86-2804AF |
Type | Bipolar |
Rated Voltage | 4.48V |
Step Angle | 1.8° |
Rated Current per Phase | 2.8A |
Resistance per Phase | 1.6 Ω ±10% |
Inductance per Phase | 6.5 mH ±20% |
Holding Torque | 3.1Nm |
Rotor Inertia | 840gcm² |
Weight | 1.4kg |
No. of Lead | 4 |
Operating Voltage | 24-50V DC |
Length | 86mm |
Step Angle Accuracy | ±3 Arc Minute |
Protection Class | DIN 40050 - IP65 |
Additional Information: